Setting Modem Speedy

Posted: 23 September 2011 in Internet, Pengetahuan

0

Berikut ini adalah cara setting modem speedy yang saya ambil langsung dari authornya yaitu Telkom Speedy.Artikel ini hanyalah sebatas berbagi pengetahuan bagi pembaca.Tidak ada maksud untuk melanggar hak cipta secara hukum.Untuk melihat cara setting Modem speedy langsung dari situsnya silahkan kunjungi http://www.telkomspeedy.com/
ADSL Modem SMC

• Default IP: 192.168.2.1
• Default password: smcadmin

Setting Bridge:

1. Klik WAN
2. Klik ATM PVC
3. Klik VCI
4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
5. Klik Save Settings

Setting PPPoE:

1. Klik WAN
2. Klik ATM PVC
3. Klik VCI
4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: (nomor speedy)@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
5. Klik Save Settings

ADSL Modem ZyXeLP-660R

• Default IP: 192.168.1.1
• Default username: admin
• Default password: 1234

Setting Bridge:

1. Pilih Network
2. Pilih WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart

Setting PPPoE:

1. Pilih Network
2. Pilih WAN
3. Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart

ADSL Modem Shiro

• Default IP: 192.168.1.1
• Default username: admin
• Default password: admin

Setting Bridge:

1. Klik Advanced
2. Klik WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router

Setting PPPoE:

1. Pilih Advanced
2. Klik WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nomor speedy)@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router

ADSL Modem Aztech

• Default IP: 192.168.1.1
• Default username: admin
• Default password: admin

Setting Bridge:

1. Klik Advanced
2. Klik WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router

Setting PPPoE:

1. Pilih Advanced
2. Klik WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router

NB:VPI/VCI Akan bebeda sesuai dengan daerah anda masing-masing..untuk informasi lebih lanjut silahkan hubungi pihak telkom.semoga membantu

Silahkan share

• Cetak
• Twitter
• Facebook
• LinkedIn
• Surat elektronik
• 
  

Like this:

Suka

Be the first to like this.